Lasar speed measurement

Lidar has always been my favourite speed measuring device. I could target individual vehicles with accuracy and rapidly measure their speed, even on a busy highway. Radar could not do the job nearly as well as it could not be easily relied on for a specific vehicle's speed in a busy environment.

An officer starts their shift by checking the instrument to ensure that it is operating as intended by the manufacturer. An automatic power-on self test must produce the expected responses. Next a series of known fixed distances were tested by operating the laser to be sure they are receiving the correct measurements. Finally the aim point was verified by passing the sighting dot over a distant object and listening to the change in pitch of a generated tone. Once this was done the instrument was ready for use.

A safe site with a good view of traffic was selected and the lidar was put to use. The aiming dot was placed on the vehicle to be measured and the trigger pulled. A train of laser pulses was emitted, received and analyzed by the device which calculated the change in distance from the vehicle to itself over time and displayed the speed for me to see and decide whether to take enforcement action or not.

The nature of the very narrow laser beam made it precise to aim at individual vehicles. At 300 meters a spot roughly the size of an orange was reflected from the vehicle. As long as there was a clear line of sight between the vehicle and the lidar there was no doubt about who the measured speed applied to.

The author is a retired constable with many years of traffic law enforcement experience. To comment or learn more, please visit drivesmartbc.ca.

This article is written by or on behalf of an outsourced columnist and does not necessarily reflect the views of Castanet.